Re: Epsilon and root move from an aggregate to anoter
Hi there, As you've experienced service disruption at a client site, I would suggest you should log a support case with our support centre, and ask for clarification of the documentation and correct...
View ArticleRe: Perfstat 8.4 hang during gethering data.
Hi. thank you for reply. that URL maybe for internal only. I can't access that URL with partner level. Yes. I will try this --exclude="command=netstat" today.But what if Tech center need "netstat" ,...
View ArticleOntap Select- ESXi host not discovered while creating cluster
Hi All, I have deployed the Ontap Select 9.3 in our setup. assigned the IP details to ontap select. I can able to access the ontap select administrator console from web client. As I added the ESXi...
View Articlerecocovery of a deleted volume 7m
Can we able to recover Volumes from netapp 7M post a deletion (no snap ,no snapmirror ) Any option likve VRQ in 8.3 ?the version is 8.1.X
View ArticleRe: Perfstat 8.4 hang during gethering data.
Hi savander,apologies for that I did not check the availability of the KB article.Sometimes perfstat can fail for various reasons, such as network latency or really high load on the controllers too, so...
View ArticleRe: Epsilon and root move from an aggregate to anoter
Hi,thank you for the quick answer. Is the thing that I should do also because customer need some official position before to let us the steps with inverse path. Otherwise he will plan an outage....
View ArticleRe: Epsilon and root move from an aggregate to anoter
Just for clarification, what Giacomo is refering to is this: Hmmmmm, Going through the steps in the KB, I would have done the epsilon and eligibility steps (Step 1 in the KB) right before the reboot...
View ArticleRe: Epsilon and root move from an aggregate to anoter
Thank you very much Sebastian.Now we'll attempt to have some official answer by support on the sequence that you're suggesting, and on which I completely agree as suspected after that fault. My best...
View ArticleChanging number of disks in the root aggregate
We have a system that is configured as follows: FAS8020, DataONTAP : 8.3.2 P2 HDD size 2.0TB SATA Name Node Type used% Available...
View ArticleRe: Changing number of disks in the root aggregate
There is no way to remove data disks from aggregate. It is possible to convert RAID_DP into RAID4 by removing one parity disk (but RAID4 is frowned upon today). Alternatively you can build new...
View ArticleRe: Changing number of disks in the root aggregate
Thanks for the swift reply. I'll review the procedure. If I used the two spares to make a new aggregate I guess you can simply add a 3rd disk later after the original root aggregate has been deleted...
View ArticleRe: Changing number of disks in the root aggregate
wrote:I guess you can simply add a 3rd disk later after the original root aggregate has been deleted and more drives become available?Correct. You can both go from RAID4 to RAID_DP as well as add more...
View ArticleRe: recocovery of a deleted volume 7m
I think there is an option in new ONTAP versions where the volume is not actually deleted until x hours later. I think it can be set to X as well. If I remember correctly its 6 hour by default. So it...
View ArticleRe: High data modification problem with snapmirror fills the volume / LUN
hi if you only have that snapmirror base snap: i would say that you need to run it more frequently or increase the volumes size, not much way around it. if you have multiple snapshots and not just the...
View ArticleRe: Changing number of disks in the root aggregate
one more thing. if you do willing to re-initialize your system (both nodes) and upgrade to 9.2+, you can use ADP. and gain around 4.5TB more then the raid DP>RAID4 conversation (so around 8.5 TB...
View ArticleRe: recocovery of a deleted volume 7m
Hi, AS per knowledge you can't recovery deleted volume on the 7-mode without aggreagate snapshot. There is options C-dot after 8.3 cdot::>vserver show -fields volume-delete-retention-hours you...
View ArticleRe: recocovery of a deleted volume 7m
In worst case scenarios, recovery by third party providers such as Kroll Ontrack or Drive Savers may be possible (at the expense of availability of other volumes) - this KB article outlines the...
View ArticleRe: recocovery of a deleted volume 7m
Hi, In 7-mode system there is no way to get deleted volumes back without aggregate snapshots. Mostly, aggregate snapshots using for a SyncMirror purpose, you should check it.
View ArticleConstant changes to OnCommand System Manager disruptive to smooth operations
I'd like to send this to the powers that be in the ONTAP 9.3x product line: Please stop making these drastic changes to OCSM. They are disruptive, annoying, and painful. I like the the tree view on the...
View Article