Re: Constant changes to OnCommand System Manager disruptive to smooth operations
I forgot to mention the changes in the Protection. You can no longer select your destination aggregate, and the XDP volume scheme has been changed. I don't have the luxury of lots of space on my...
View ArticleiSCSI LUN with same name in one igroup (7mode 8.2.5) Win 2016 Server
Hi Team, I have two iscsi Luns (7mode) in one igroup and both Luns are mapped to the one windows 2016 server. Wed Mar 14 14:51:37 AST [eccnas5:lun.map:info]: LUN /vol/EX91VZ103/ex91vz103/data was...
View ArticleNetapp ifgrp shows "partial" when all the associated ports are UP
Hello All, New netapp 4 node cluster has been setup and all the port are showing as "UP" while I issue "net port show" command. But "ifgrp show" command show "Partial" for some wierd reason. We are...
View ArticleRe: Netapp ifgrp shows "partial" when all the associated ports are UP
Hi ,when an interface group reports partial it means that either one or more physical links are down or LACP packets are not exchanged correctly (when using LACP).Please have a look at this to start...
View ArticleRe: iSCSI LUN with same name in one igroup (7mode 8.2.5) Win 2016 Server
Hi ,when Windows shows a disk as "Unallocate", it means it's not able to read the partition table inside of it anymore, same thing applies to LUNs.You should make sure that the LUN you are presenting...
View ArticleReport showing volumes with NVE enabled??
Good afternoon! Is there a report available that will show all volumes that have NVE enabled in 9.1? I have looked in OCUM and System Manager but I did not see anything. The only thing I have found...
View Article16Tb lun limit windows Ontap 9.3
Hello smart people...I was asked today about creating a lun for windows of 25TB, I know in server 2008 this is the max, but, I am pretty sure windows has increased this in 2012 and 2016. Does anyone...
View ArticleWhere is this IP address coming from?
I opened a support case about this, but it just keeps going around in circles. I recently attempted to download an OnTap update from our internal HTTP server for our AFF8040, and the address that the...
View ArticleRe: Where is this IP address coming from?
Hi Did you upgrade to ONTAP 9.3? I guess that problem Bug ID#1142938 Bug Detail Bug ID1142938TitleThe DHCP IP address for the e0M interface is not removed after installing ONTAP 9.3Duplicate of Bug...
View ArticleRe: Report showing volumes with NVE enabled??
Hi, Try using the command volume show -is-encrypted truevolume show -encryption will list the encryption state for all volumes. None indicates not encrypted.Refer...
View ArticleRe: Where is this IP address coming from?
That is exactly what the problem is. We upgraded from 9.2 P1 to 9.3 P1. I will keep waiting for a fix. Thanks!
View ArticleRe: Report showing volumes with NVE enabled??
Sahana, Thanks for the reply. I have tried both of these commands and they both give me information about the encrypted volumes. The volume show -is-encrypted true command would be great if it had a...
View ArticleHow to set up a single data aggregate (ONTAP 9.1P5) but avoid I/O going...
Question from a customer setting up new FAS8200s with 3-4 shelves of 1.8TB SAS drives: Config: set up two aggregates, one to each node, each with ½ the disks, and a single SVM for each data aggr and...
View ArticleRe: Report showing volumes with NVE enabled??
These will display the output you are looking for: vol show -fields encryption-statevol show -fields encrypt -Bill
View ArticleRe: fpolicy logs in the Ontap
which commands? you cannot see within ONTAP any logging from Fpolicy? If read that response correct, you can still tell number exections per user?
View ArticleRe: Antivirus Connector Version UP (1.0.2D1 → 1.0.3)
This site has helped me personally and helped me help others. I am so glad you decided that you need to pass it on because we all need it passed on. Very interesting. If you have any problems, contact...
View ArticleRe: How to set up a single data aggregate (ONTAP 9.1P5) but avoid I/O going...
Aggregates are tied to nodes. Aggregates cannot span nodes. FlexVol volumes live on single aggregates. You can set a data LIF on each node and have clients only access volumes based on their locality....
View ArticleClik here to view.
Need to know cause High cpu utilization
Customer has two AFF8080EX.The basic usage is as follows. CPU AVG(%)NFS IOPSNetIn(KB/s)NetOut(KB/s)SSD Read(KB/s)SSD write(KB/s)AFF1For Internet VirtualizationOntap 9.0, 960G x...
View ArticleNew TR Release: TR-4613-ONTAP Select on KVM Product Architecture and Best...
NetApp® ONTAP® Select is NetApp’s solution for the software-defined storage (SDS) market. ONTAP Select brings enterprise-class storage management features to the software-defined data center. ONTAP...
View ArticleRe: Create audit log on Snaplock Enterprise volume fails
This doesn make sense at all ...we have the SLE license to be able to delete worm files, which is not possible with an SLC license at all.So SLC does not even need a 'priv del log'... /Tom
View Article