You should just be able to create a clone of the volume and re-map out just the lun you need.
https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-8DCD4B76-DE5D-42F6-AA29-EC6EFA5A7FA6.html
Take this opertunity to break the lun out to it's own volume too.
Thanks for the reply, but after some more investigation, I discovered that the volume was no longer needed, so I could just delete it. So, problem resolved. 
That also works
I've seen that type hang around after 7MTT, it's usually just a matter of setting it to DP.
Wow, I found this out by accident.
It appears that if a 'volume move start' operation is instantiated, the source volume will be iretrievably deleted at time of the trigger. I asked in one of my posts here for NetApp to consider keeping the volume in the volume-recovery queue, however, I've found a better way, and one which already exists. That is, if a 'volume move start' is instantiated on a volume with a flex-clone, ONTAP warns that the source volume will be kept around temporarily, until the clone is removed, or split.
I have one such operation running right now, and I will post the results.
TasP
Hi All
When using cluster mode. Is it possible to have AutoSupports sent to an internal Web server location as opposed to using a SMTP server..?
My AutoSupports cannot be sent direct to netapp as there is no external connectivity and SMTP is a blocked protocol on our network.
So getting a zipped package is difficult.
From the below link it looks like it can be sent out to an FTP site (which i assume could be internal)
https://kb.netapp.com/app/answers/answer_view/a_id/1033620/loc/en_US
However again FTP is an unsupported insecure protocol. SFTP would probably work for us however it does not state that is is supported.
At the moment I am having to copy each file out of an Autosupport created via the console from the SPI in to a folder on my local PC.
BTW.
If its possible, it may be acceptable (though not ideal) to enable the option if it is still present to copy the file straight out of a CIFS session browsed directly to the ETC$ folder (as you would with 7Mode.
Can this be enabed as a temporary measure in order to grab a copy of the AutoSupport log dump..?
Can't figure out how to get compression enabled on a snapmirror relationship established with 7MTT. Relationship is created fine using the tool. Non-compressed transfer works just fine. I've got many TB worth of data to move and I'd rather see it take a couple days vs weeks.
Policy has compression set to true on the CDOT cluster. Temp license for Snapmirror is installed on both source and target. I've restarted baseline copies and started them from scratch after the policy change. Verified the appropriate policy is applied to the relationship.
Source: 8.2.3P6
Target: 9.4P3
Any guidance much appreciated. I'm pretty new to CDOT.
Mike
I don't have access to a cluster that has quotas enabled, so I wasn't able to get any real results, but I was able to successfully execute a CLI command similar to what you provided:
quota report -disk-used >1tb -files-used > 1000000
Have you tried running a similar command?
Hi
i think he wishes to make an OR statement rather an AND - that your example will result.
i tried to find a way as well. but the only thing worked for me is just to execute the command twice...
quota report -disk-used >100g;quota report -files-used >500
Gidi
https://library.netapp.com/ecm/ecm_download_file/ECMLP2494078
p.6
Features and volumes not supported for transition
- Network compression for SnapMirror
thanks. obviously missed that. :P
Thank you for the reply. You are correct; that's what I was going for. I guess I'll just have to settle for looking for similarities between two separate commands.
HI,
I have tried and failed, below is the error, i have upgaded before and it was successfull. but this time it is failed, My ftp sever works fine as i have tested it.
Netapp_clus::> system image get -node netappclusA -package ftp://10.171.146.68/93P10_q_image.tgz
Enter username for remote host "10.171.146.68": v-sarosa
Enter password for remote host "10.171.146.68":
Software get ftp://.../93P10_q_image.tgz started on node netappclusA
Downloading package. This may take up to 10 minutes.
100% downloaded
Install Failed.
Failed to download package from ftp://.../93P10_q_image.tgz. Error: Timeout was
reached : FTP response timeout
Error: command failed: Install Failed. Failed to download package from ftp://.../93P10_q_image.tgz. Error: Timeout was reached : FTP response timeout
In GUI alos i have tried but getting the error as well
Please anyone help on this, Help is much appreciated!!!
You need to purge the deleted volume from the recovery-queue, then the keys on kmip server will be removed.
Below please find the log. From ATTO, I typed "sastargets" and I can see all netapp disk and disk shelf. On the MDS, I found wwpn of ATTO and NetApp controller fc port on flogi database. Any idea what happended here? Thank you.
Apr 26 14:04:06 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 1a reports the presence of no Fibre Channel devices.
Apr 26 14:04:06 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 1c reports the presence of no Fibre Channel devices.
Apr 26 14:04:07 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 2a reports the presence of no Fibre Channel devices.
Apr 26 14:04:07 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 2c reports the presence of no Fibre Channel devices.
*> storage show bridge
No bridges found.
*> disk show -n
Local System ID: 538019513
disk show: No unassigned disks
*> disk show -v
Local System ID: 538019513
disk show: No disks attached to system.
Anything else in the logs besides those 4 things? And anything in the other equipment?
And what are the code versions of the 8200, MDS and ATTOs?
Thanks for this!!
HEllo,
Could you tri this command :
ucadmin show
And say us witch port are used for disk, pls
It seems a like a bug in ONTAP9.4. The issue disappear after I upgrade the ONTAP version to 9.5P3.
There was a few out there. I have a customer with a 8020 MCC FC on 9.1 and he's seeing one where the cluster thinks an ATTO is offline, even though it's not.