Upgrade ontap 7 mode to CDOT 8.3.2
Hi Guys, I have netapp FAS 3220 it has ontap 8.1.4P1 7 mode. Now I am planning to upgrade to 8.3.2 CDOT. Below is the my queries Please help. 1. It has single controller so is it required cluster...
View ArticleRe: Upgrade ontap 7 mode to CDOT 8.3.2
You cannot upgrade 7-Mode to C-Mode. You need to wipe clean and reinstall in C-Mode. Existing data is lost. If you want to preseve it, you need to migrate data to another C-Mode filer or backup and...
View ArticleRe: Upgrade ontap 7 mode to CDOT 8.3.2
You mean we cannot upgrate 7 mode to C mode with existing data but we can install newly c mode with FAS 3220 Right? &
View ArticleRe: Upgrade ontap 7 mode to CDOT 8.3.2
Thanks a lot for your quick reply. 1. It has single controller so is it required cluster switch ?2. Cabling need to be change? We have NetApp DS4243 Disk shelf and single controller?
View ArticleRe: Upgrade ontap 7 mode to CDOT 8.3.2
Single node cluster does not need cluster switch. Disk shelf attachment is the same in C-Mode as in 7-Mode.
View ArticleRe: df -h command
I will share exactly what I need. We have Snapmanager for exchange through which we take backups and retention is " Do not Delete and Backups" but still I see only last 10 days backups, with my...
View ArticleRe: df -h command
Hi Snap reserve is not about how much you allow the snapshot to grow. it's about how much you allow the data to grow (and by that. reserving space for snapshots). Two main things that might causes...
View ArticleRe: df -h command
I have 3 backups DailyWeekly and standard Daily "C:\Program Files\NetApp\SnapManager for Exchange\SMEJobLauncher.exe" new-backup -Server 'CIGEX7' -ManagementGroup 'Daily' -NoTruncateLogs $False...
View ArticleRe: Ontap Select with 2 Nodes HA
Hi You can set Cluster with 1 node, 2 node and 4 node also. 1. If you are using 1 node cluster then you don't need to configure intra cluster network. 2. If it is two node cluster you have configure...
View ArticleSVM Root Volume Protection Not Updating on Two New Nodes
We just added two nodes to our NetApp cluster, making it a four node cluster. I am trying to expand the SVM root volume protection that I set up previously, following the steps in the SVM Root Volume...
View ArticleRe: SVM Root Volume Protection Not Updating on Two New Nodes
One more detail: here is the snapmirror status. Source Destination Mirror Relationship Total LastPath Type Path State Status Progress Healthy...
View ArticleRe: Ontap Select with 2 Nodes HA
I'm surprised there is still a requirement for dedicated cluster switches with 4 nodes when using a software defined storage. I haven't seen this mentioned in any of the Ontap Select design guides....
View ArticleRe: Ontap Select with 2 Nodes HA
Are you performing it on simulator or real time storage frames?.... Please go through the below link for your reference....
View ArticleRe: Ontap Select with 2 Nodes HA
This link applies to physcal netapp storage...not ontap select. This thread is about Ontap Select. Ontap select is a virtual Netapp appliance. There is no "switchless" config because there is no...
View ArticleRe: ONTAP 9 on FAS storage array with compaction
Sahana,Thanks for the documentation reference. I still would like to know if there is anyone out there using compaction on a FAS system. I have a FAS 8040 system and am interested in trying out ONTAP 9.
View ArticleRe: Ontap Select with 2 Nodes HA
Currently Select only supports 1 node (single node) or 4 node cluster configurations. The 4-node config requires an internal network on 10Gb NICs that functions as the interconnect - but you can use...
View ArticleRe: VTL700 Nearstore Disk sanitization procedure
Thanks for your help, but unfortunately this documentation mentions nothing of a process or method to sanitize system, nor a command for the purpose of deleting RAID groups. Not surprisng considering...
View ArticleRe: df -h command
Hi i don't see the file. but try serching the volume name in. every snapshot delete should be there. (old EMS files are called EMS.0 / EMS.1 / EMS.2) Gidi
View ArticleRe: 7MTT Access not possible after installation
Hi, Can you check the compatability of Java version installed. Thanks
View Article
