Re: Data ONTAP API Failed : Snapmirror error: The aggregate that contains the...
Also check the destination aggregate must be 64 bit. For Supported compression/deduplication configurations for volume SnapMirror. refer the TR document page no...
View ArticleRe: Clustered Data ONTAP Management Pack for System Center OpsMgr 2012
could u try the support matrix firstly?http://mysupport.netapp.com/matrix/#search
View ArticleRe: TR-4513 Security Hardening Guide, 4.11 - "admin_ssh" role preventing HTTP...
looks like u need to enable the access for system manager. use below cmd:vserver services web access create -vserver vserver_name -name sysmgr -role role_namehopefully helps
View ArticleRe: shelves migration from FAS3210 to 2554
yaoguang wrote:in general procedure for 7mode...5. go to maintennance mode to assign the disks to new node6. boot it up normally...5.5 - restore /var from old disks, otherwise some configuration is...
View ArticleReporting on configuration.....
FAS3220OnTap 8.3.1 c-modeOC 3.1.2OCUM 6.4 P1OCPM 2.0 RC1 I've seen countless results from google about grafana and OCUM and OCPM that can report on capacity, performance etc... we have those in place....
View ArticleRe: Reporting on configuration.....
I agree, we miss the functionality of the older DFM where it created backups of the configuration and you could run comparisons to see what had changed. Doing this manually is not really an option,...
View ArticleRe: TR-4513 Security Hardening Guide, 4.11 - "admin_ssh" role preventing HTTP...
That did the trick, brother, thanks!
View ArticleClik here to view.
Netapp Powershell GUI Report Tool
Hello, here is a siple powershell GUI tool that you can use to collect info on Vols, LUN's and Aggrs. Script only contains get commands, so using read only account will work. Only tested on cDOT...
View ArticleSRA Array Manager Error
Hello All, I am currently faced with the dreaded "device cannot be matched to a remote peer device" in my SRM array manager configuration. So I have a question: Per the Netapp Fas/V -Series Storage...
View ArticleRe: Netapp Powershell GUI Report Tool
Hi, Thanks for the tool, seems this doesn't work ( Tried out myself ) for 7-Mode. Thanks, Nayab
View ArticleRe: Netapp Powershell GUI Report Tool
Hello Nayab, sorry about that, I did mention that its only tested on cDOT.In my enviroment I dont have 7-mode so could not create anything for it.Unless commands are simmular instead of nc-aggr it...
View ArticleRe: Clustered Data ONTAP Management Pack for System Center OpsMgr 2012
Hello, I did that and haven't got any further...do have another way to solve this? greetings Matthias
View ArticleRe: SNMP OIDs support in Netapp c-mode
same problem here. Looks like SNMP on NetApp is dead.
View Article7MTT Access not possible after installation
I'm trying to run 7MTT on a windows 2012 R2 Standard Server of my customer. The service is started but I can't access the tool in any browser. It says connection refused. In the server-console.log the...
View ArticleCIFS performance issues
Hi I have inherited some NetApp filers with a mixture of CIFS and NFS exports and this morning I received some complaints about performance issues when copying files from multiple windows hosts to the...
View ArticleOntap Select with 2 Nodes HA
Can ontap select support a 2 node cluster? I've read the best practice and it discusses single nodes, and a pair of HA nodes (4 total). But its not clear to me if the 4 node cluster is the maximum or...
View ArticleONTAP 9 on FAS storage array with compaction
Has anyone with a FAS arrary upgraded to ONTAP 9 and tested compaction yet? I am curious to see how a non FLASH FAS handles compaction. We currently have a FAS 8040 with a flash pool and are wondering...
View ArticleSwitch from NFS3 to NFS4.1 VMware datastores
Hi guys, just curious, what is needed to change volumes used for VMware datastores with NFS3 to run with NFS 4.1?Simple unmount on both ends, enable 4.1 support on NetApp and mount again? Thanks!
View ArticleRe: df -h command
Hi The filer calculated 10% of your 1078GB as 119GB (or 125627792 k-bytes per the command output).googles says that 335% of 119 is almost 400. – make sense for the snapshot you got I guess i really...
View ArticleRe: Exchange 2007 and Snap Manager Exchange
If I dont have the snapshot reserve space good enough on the volumes may be thats the reason its overwriting the old snapshots instead keeping them ?
View Article
