Re: Snapdrive unable to see LUNs - SCSI Initiator error in event viewer
Hi Jonathan, Found any solution for your issue? Regards,Thierry
View ArticleRe: Can't remove root volume for DR SVM vserver
Support was able to help. The problem was simple, identifying it not so much. Even though the snapmirror relationship had been removed entirely, it still wasn't broken. I'm not sure how that works, nor...
View Articleblock size of LUN
What is the default block size of LUN in NetApp Storage. And how we can check the same.
View ArticleRe: VSS Snapshots
not sure there's any easy way to do that, you probably need to copy everything over thru iscsimaybe better to ask ur ps team?
View ArticleRe: Disk shelf DSMK2-ESH2 as JBOD
That is not true...this are JBOD and can be used. However, you may need to do a few things depending of the type of disks in order for the OS to be able to use the LUNs.radek_kubka wrote:Hi Shahid, I...
View ArticleRe: Disk shelf DSMK2-ESH2 as JBOD
All you need to do is install the Fibre channel target rpm into RHEL. Then you will be able to service LUNs...or use Openfiler which supports FC now...also, Solaris or Nexenta.
View ArticleFlashPool - Performance contribute?
Hi all, it there a way, an approximate one of course, that let us estimate the contribute of SSD on a FlashPool aggregate?Everywhere I read data that seems to be almost marketing one or the SPM...
View ArticleONTAP Select - configuration_failed InternalErr: Failed to read host version
Hi all, I have been trying to deploy Ontap select on an ESXi 6.0 and I cannot configure the host after is has been authenticated: (ONTAPdeploy) host show-all...
View ArticleRe: FlashPool - Performance contribute?
Hi , I think you're looking for TR-4070, and in particular the section on the Automated Workload Analyzer (AWA). Hope that helps! Andrew
View ArticleRe: Ask The Expert Session About ONTAP 9
Hi, This was a Twitter session and there is no recording of this session. Do follow our Twitter page https://twitter.com/NetAppKB. Thanks
View ArticleBranchcache configuration with windows server
Hi Guys, I need to configure Branchcache on Netapp cluster mode with windows server at branch office. Just want to know the configurations requirement or if there is any Technical report from Netapp...
View ArticleTo find out single or no active paths from iSCSI LUNs to the filer
One of good thing the following script to do is to list iSCSI LUN's that have either single or no active paths to the filer. Can somebody please let me know what OnTap commands would show the same...
View Articlecluster management ports stopped working
Hi all, I've configured cluster management ports on the same lif where data is being transfered. but I've associated the cluster management port with node admin vserver.Also what I did is that I've...
View ArticleRe: Branchcache configuration with windows server
Hi , Check the "File Access Management Guide" for your version of ONTAP. There is a section on BranchCache in there which explains setup and management. Hope that helps. Andrew
View ArticleRe: To find out single or no active paths from iSCSI LUNs to the filer
Could you show example of problem output you mean? I'm afraid I do not understand what "iSCSI LUN's that have either single or no active paths to the filer" means.
View ArticleRe: To find out single or no active paths from iSCSI LUNs to the filer
If you're just interested in the LUN path information from the script referenced, it's in lines 3333 - 3694. Alternatively, you could execute the script with the "-RunSection san" parameter. Andrew
View Articlesnmpwalk got No data available in this sub-tree for volumeNearlyFull on OnTap...
I have FAS8020 with Ontap 8.3.2.I try to set up snmp to monitor volume free space.I download mib version 2.4.2 and can see it undr netapp-0 for volumeFull and volumeNearlyFull with OID...
View ArticleHow to configure SNMP trap for vscan options in NetApp FAS3240 7-Mode Version...
Hi all, netapp> vscan scannersVirus scanners(IP and Name) P/S Connect time (dd:hh:mm) Reqs Fails Curr....
View Article