cDOT CLI >igroup show
Hi In 7-mode you can run the igroup show -v command and see which target port an initiator is logged in on. Is there an equivalent command in cDOT? Thanks
View ArticleRe: cDOT CLI >igroup show
Hi, you can always use -instance in the command line to get more output. M.
View ArticleRe: Separate root aggregate?
Hello, I am not able to access the link you have provided. http://now.netapp.com/NOW/knowledge/docs/ontap/rel801/pdfs/ontap/smg.pdf Regards,Anita
View ArticleRe: Unbale to delete vserver (cDOT 8.2.1P3)
Hi Guys, I have exactly the same issue but when I try to delete the vserver transition peer entry I get an error that this peering is using a snapmirror relationship.When a check the snapmirror...
View ArticleUnable to delete vserver (cDOT 8.2.1P3)
Hi Guys, I have exactly the same issue : http://community.netapp.com/t5/Data-ONTAP-Discussions/Unbale-to-delete-vserver-cDOT-8-2-1P3/m-p/99372#U99372 but when I try to delete the vserver transition...
View ArticleRe: cDOT CLI >igroup show
Thanks, I know about the -instance switch. My question was about running a command which shows which target port an initiator is logged into, the -instance switch doesn't show this.
View ArticleRe: cDOT CLI >igroup show
You can use "iscsi initiator show" to list initiators and target portals they are logged into and "iscsi interface show" or "iscsi portal show" to match portals and interfaces.
View ArticleStrange NFS mount issue
I have a strange situation here at the customer site that I have never seen before and I am hoping someone can point me in the right direction. I have a server that is able to mount a volume via NFSv3...
View ArticleRe: Unable to delete vserver (cDOT 8.2.1P3)
Hi Rouden, Could you check if your destination is listed using snapmirror list-destinations If you have it in there note down the Relationship ID of the affected SM and try using snapmirror...
View ArticleRe: statistics lun show latency
Hi All, It was BUG identify by NetApp, "statistics lun show" display should be microsecond but the result display "ms". Best regards, Chung
View ArticleRe: Create a user limited to create/delete snapshots on ontap 8.3
I had to add the following. Seems to be working. security login role modify -role snapRole -cmddirname version -vserver <vservername> -access all BIG THANKS for the ideea
View ArticleRe: Create a user limited to create/delete snapshots on ontap 8.3
You are welcome!Its good to know that I did help someone today :-)Much Appreciated.
View ArticleRe: cDOT 8.2 ifgrp and network interface
Hi, How did you resolve this issue. we are facing same inssue for one of our customer. Your comments would be helpfull to us........
View ArticleFAS 3250 movement- 3250
What are the files that need to be backed up before physical movement of the Storage FAS 3250
View ArticleRe: cDOT CLI >igroup show
Thanks for the reply. I guess that works fine for iscsi initiators but not fibre channel initiators. Thanks
View ArticleRe: FAS 3250 movement- 3250
Hi,You can refer this KB article which talks about the best practices for Physical Relocation of Storage, https://kb.netapp.com/support/index?page=content&id=3011961 Thanks
View ArticleRe: cDOT CLI >igroup show
Nothing wrong with 'fcp initiator show' as long as you know the command exists - thanks
View ArticleRe: Grant user to create/delete snapshot only to specific volumes?
Hi, You can try below steps, security login role create snapRole -cmddirname "volume snapshot" -access all -vserver <vservername>security login role modify -role snapRole -cmddirname DEFAULT...
View Article
