Re: Disk unpartition failed
Agreed, I was only able to get 9.1 RC1 to work properly... GA and P1 gave me fits.
View ArticleHow many vol move operations can be active at same time
Hello, I am planning a Volume migration from two older Nodes (FAS3250) to two new Nodes (AFF8040) inside same cluster (ONTAP9.1). My pan is to start all volume moves at one time (65 Volumes) and set...
View ArticleRe: Undo Deduped volume - v3140 - ONTAP 7.3.7P1
Hi Kevin, WAFL never trashes data, therefore you can undo the dedupe first and then increase the size of the volume as below. sis off <volname> sis undo <volname> Thanks,Nayab
View ArticleRe: How many vol move operations can be active at same time
Found it in TR- 4075Concurrent Volume Move JobsVolume move jobs can run concurrently on the same node or different nodes in a cluster. In general, all jobs serviced by the same controller share the...
View ArticleNetapp Upgrade Check script ver 2.4 ..checking 8.3 upgrade
On running the check script we had a number of errors "LIF does not have a home node that matches the first node to be upgraded of "node_name"". Do we need to move all LIF to use the first node to be...
View ArticleRe: How many vol move operations can be active at same time
Hello, the max of simultaneous volume moves in 8.2 was 16. But concurrent reads (on SAS/SATA disk particularly) could impact severly your 3250. So, moving lot of volumes simultaneously can last long...
View ArticleRe: How many vol move operations can be active at same time
Ok, so no more limit but a kind of automatic scheduler. Becareful with performance impact.
View ArticleAutomated-Working-Set-Analyzer - How the heck do I read this report?
I have a flash pool aggregate, but I'm pretty sure I didn't purchase enough flash pool disk. I'm attempting to use the 'Storage Automated-working-set-analyzer' commands to see if I need to purchase...
View ArticleRe: esxi 6.5 and ontap 8 simulator
The Ontap 9 and 9.1 simulators have the same problem. It is a change in vSphere 6.5.At some time NetApp will probably change the simulator.I will use the VMware workstation version till then.
View ArticleDefault lun settings
Is there an option to change the defaults on every new lun created?I want to have the space-allocation option set (on every lun created).
View ArticleRemove P1 and P2 partiions from disk
I have a question on how to remove the P1 and P2 partitions (root and data partition) from a disk. I can't seem to get rid of them. If i do a wipeconfig of the whole machine all the disks are zeroed...
View Articleperfstat viewer/parser
Does NetApp have a customer facing perfstat8 viewer? Im familiar with LaTX but this isnt available to customers. Thanks,Ryan
View ArticleRe: perfstat viewer/parser
Ryan I was able to get to LaTX on the support site here:http://mysupport.netapp.com/info/web/ECMP1147404.html I hope this response has been helpful to you.At your service,Eugene E. Kashpureff,...
View ArticleRe: Remove P1 and P2 partiions from disk
Sarek - I'd try assigning the ownership, zeroing, and then try to unpartion... I found these references on the support site: 1057401: Partitioned disks cannot be unpartitioned in Maintenance...
View ArticleSnapshot volume is full
Hi All, I am new to this platform, One of my snapshot size is kept on increasing and now it has consumed all the snap reserve space by taking spill. I wonder if this can cause any damage to snapshot or...
View ArticleClik here to view.
add image failed in on command manager for ONNTAP upgrade
Failed to add the software image to the cluster. Verify if the image and the specified URL are valid and ensure that there is sufficient space in the system management storage area.what is the reason...
View ArticleRe: Remove P1 and P2 partiions from disk
We do this process all the time because the new systems come from Netapp with ADP configured on encryption capable disks. Record which disks are owned by each node in the chassis.Bring controllers down...
View ArticleRe: Snapshot volume is full
Hi You don't need to worry about snapshot reserve. It won't impact volume, but if snap reserve is full then snapshot will start consuming data reserve from the volume. In this case you have to be...
View ArticleAppend additional property to existing cifs share using Powershell
Given whatever change occurred between us running 8.3 and now being at Ontap 9.1, we need to add the show_previous_versions property to a number of cifs shares to give users VSS functionality back....
View Article
