Re: Help with Ontap 8.1.4 verbose on console on FAS3140
Hi on the filer that not outputting messages. check if someone created /etc/syslog.conf file. if you don't see important customization in it. you can delete/rename the file so the system will have the...
View ArticleIn node takeover, Time required to restart ping for FAS2520 cDot8.3.2P9
Hi, i have a 2-node cluster FAS2520 cDot8.3.2P9 with a cluster mgmt lif in cluster.When i did cluster takeover, it took one and a half to two minutes to restart ping communications.I think that this...
View ArticleRe: In node takeover, Time required to restart ping for FAS2520 cDot8.3.2P9
In this instance, when the controller did the takeover, and the cluster-mgmt LIF moved, there is a forwarding timeout on your switches and routers that determines how long it takes to come back. For...
View ArticleRe: SVM-DR after 7MTT snapmirror transition
Hi, Known limitation with SVM DR: The source SVM does not contain data protection (DP) volumes and transition (TDP) volumes. It is better to have the DP volumes in a volume SnapMirror relationships...
View ArticleRe: ONTAP 8 7-Mode v8.2 EOS?
Hi, If you have questions regarding Software Version Support , please contact your NetApp sales or channel partner representative. Thanks
View ArticleRe: Upgradation of disks firmware steps
Yes, it was mentioned in upgrade advisory. I have data ontapp 8.1.1 version which I need to upgrade to 8.1.4 version. As per update advisory, I need to update firmware of my disks before OS...
View ArticleRe: Bringing up/down the physical interface in C-mode
Verify you a0a. Check it with net port ifgrp show
View ArticleRe: OnTAP Select Deploy 2.2.2 on VMFS-6
Hi, ONTAP Select can be deployed on the following hypervisors: 1. VMware ESXi 5.5 Update 3a (build 3116895 or greater)2. VMware ESXi 6.0 GA (build 2494585 or greater) Refer...
View ArticleHow to convert TDP to XDP SnapMirror?
Hi, We have an old Netapp filer running 8.2.4P4 7-Mode which is the SnapMirror source to two remote locations running ONTAP 9.1 cluster as destination. We have a working SnapMirror type TDP setup...
View ArticleRe: OnTAP Select Deploy 2.2.2 on VMFS-6
- Thanks for that. Really useful. What exactly isn't supported/working here? Could I for example run up a VMFS-5 Datastore on my ESXi 6.5 nodes and it would 'work' just wouldn't be supported? Do we...
View ArticleRe: Upgradation of disks firmware steps
This is why we asked these questions. Why are you going to ontap 8.1.4, and not a higher version. If you have cdot, you should be looking to go to 9.1p1 If you have 7-mode you need to go to 8.2.4 -...
View ArticleRe: DS2246, DS224C and spares
Gidi, Thank you. This is exactly what I was looking for. Seems the default setting on our system, a FAS8200, would be stack. Guess it did indeed already have the intelligence built in to assign the...
View ArticleRe: DS2246, DS224C and spares
Disk ownership rules are not relevant for spare selection (if I understood your question correctly) unless all 6G shelves are owned by one node and all 12G shelves are owned by another node.
View ArticleNot able to see server initiators on storage
Hi Techies, We have 8 UCS blades which are connected to our NetApp fas 8040 and working properly. Recently server team installed 4 more UCS blades. On storage end we have 2 FCoE SVM's. One is for only...
View ArticleRe: DS2246, DS224C and spares
Sorry, is right. i was not thinking on the whole process. the assignment for replacement in the raid group is controlled by: storage raid-options show...
View ArticleSRA 4.0 (why an SRA .ova server install?)
In reading the new storage replication document it talks about downloading the SRA and .ova for SRA server. What is the SRA server? I am planning on using the 6.5 vCenter VCSA linux applicance. Along...
View ArticleSMSQL Verification - Unable to Mount Database clone
Good morning, We have a SQL 2014 database server, we run SMSQL 7.2.1. The SMSQL backup runs successfully however the verification, which runs on a dedicated verification server fails. Here is the error...
View ArticleRe: Help with Ontap 8.1.4 verbose on console on FAS3140
You guys were right, someone create a syslog.conf file on the mute Filer... I deleted and know it's all talky againThanks for you both for the fast reply, gonna give a good read on both your references.
View ArticleRe: Help with Ontap 8.1.4 verbose on console on FAS3140
You were right, someone created an syslog.conf... I`m going to read thru the link you posted to learn more about syslog on NetApp.Thanks!
View ArticleUndo Deduped volume - v3140 - ONTAP 7.3.7P1
Hello, I have a v3140 running ONTAP 7.3.7P1 7Mode and I have a deduped volume that has hit 99% full and when I try to grow it past 4TBs I get "Selected SIS volume size is too large; maximum is 4096GB."...
View Article
