Re: Cannot Execute Perfstat on FAS8080EX cluster mode.
You hace to execute perfstat 1 node at a time, otherwise it won't work.
View ArticleRe: Cannot Execute Perfstat on FAS8080EX cluster mode.
Just install Openssh and follow instructions properly. I encountered this issue earlier. There must be a KB for this Hope you can find it. It will work. Regards,ChaitanyaNetapp PS
View ArticleRe: IPV6 Configuration
To communicate both partners must know how to talk to each other. Do "other IP" know how to route to your new IPv6 address? Does your gw know how to route between both subnets? Without seeing actual...
View ArticleRe: Showmount showing the volume after the exporting Only qtree in CDOT
Yes . I've enabled the showmount option which allowed the client server see the all the NFS shares including the vol which was not exported as well..I am trying to hide that volume and allow only...
View ArticleNFS Export Permission problem for Linux on cDOT 8.3.1
Hi, I've just created our first SVM for NFS and we are having problems mounting voumes on Linux hosts: 1. I created an export policy with rules to allow four servers to mount the volume...
View ArticleRe: NFS Export Permission problem for Linux on cDOT 8.3.1
The hosts must have at least read access to the SVM root volume. This likely is associated with the export policy named default, though you could make and apply a custom policy to the SVM root volume.
View ArticleClik here to view.
Does Data Ontap support ADP for Flash Pool in an Infinite Volume?
Hi all, Does Data Ontap support ADP for Flash Pool in an Infinite Volume? Please let me know. Thanks.
View ArticleRe: Is it safe and 'recommended' to reclaim/shrink oracle/sysadmin volumes in...
if you see the free space, you can resize the volume. it's safe. if you're not so sure, ask ur ps guy to help?
View ArticleRe: data-protocol can only be set at interface create, not modify
We have the same issue ,Running on Cluster data ontap 3.1 , still not able to modify the data protocol on the lif . Currently cifs is enabled , would like to add nfs also , But dont see any...
View ArticleHow to enable a non root user ?
Hi, I have created a read only user. 1.) created role 2.) creatd group adn role added to the group 3.) created user and added user to the group but the user status is "expired" . How to enable the...
View ArticleRe: How to enable a non root user ?
Hi Refer Netapp KB 2013761 User account is set to expired when created
View ArticleNDMP backups very slow - VERY!
Hi Guys, Since the last couple of weeks by NDMP backups have been failing, prior to that they were just very very slow. All this started when our Netapp storage was upgraded from 7 - Mode to cluster...
View ArticleRe: NDMP backups very slow - VERY!
Hi, May i know your ontap version and the version of the backup tool you are using ? Thx,Nayab
View ArticleRe: NDMP backups very slow - VERY!
The Netapp version that we are on is 8.3.1 P1 and the backup tool that I am using is Netbackup 7.6.1 and I am using LTO 5 tapes drives on my Quantum TL.
View ArticleMultiprotocol type chaange need to be done
How we can change the Multiprotocol type in NetApp storage at presentit it is vmware and we want to convert it into Linuix. Regards, Sunil Rawat
View ArticleRe: Multiprotocol type chaange need to be done
Command run islun alignment show LUN NAME lun alignment show /vol/vmfs_w7_001/vmfs_w7_001.lun hq-fas3250-p-1*> lun alignment show /vol/vmfs_w7_001/vmfs_w7_001.lun...
View ArticleKeep the same SVM name as primary when do DR test
When we snapmirrior CIFS shares over to DR site, we will have to use SVM name on DR filer, which is different from Primary site. I am thinking this is not the right way, the application should not...
View ArticleRe: How to enable a non root user ?
Hi, Thanks for the information. I could add the user with status enabled. but now the problem is that I am unable to login with the newly created user. Putty is throwning the error "server unexpctedly...
View ArticleRe: Strech metrocluster failover test - some weird things
Hi Niel, i hope you're still reading this thread. Just one more advice please : about UPS, somebody else gave me the same advice but told me to put it on the controler. Then when we loose power,...
View Article