Re: ONTAP Recipes: Deploy a MongoDB test/dev environment on DP Secondary
Hi, Thanks for sharing this information. Cheers
View ArticleRe: ONTAP Recipes: Send ONTAP EMS messages to your syslog server
Hi, Thanks for sharing this information and very useful for customers. Cheers
View ArticleSecd DNS timeout server
Hi All, I have errors on my connection timeouts. ERROR secd.dns.server.timed.out: DNS server XX.XX.XXX.XXX did no t respond to vserver = XXXXXXX within timeout interval. ERROR...
View ArticleRe: Sed DNS timeout server
First step is to try basic troubleshooting with network ping - the aim here is to ping from the management IP address of the vserver/SVM to the DNS server IP. The management IP of each SVM must have a...
View ArticleRe: Error 500 Servlets not enabled In Fas 2020
The GUI management is optional - you can still manage this system over CLI via ssh or telnet. The official fix is to put the ontap.exe file for 7.2.1P4 back on the system and run "software install...
View ArticleRe: Sed DNS timeout server
I see the ping is perfectly alright and routing also in place.
View ArticleRe: ONTAP 8.1.X VSES AntiVirus Scanning 7-MODE
Hi, You can refer Antivirus Scanning in Data ONTAP 7-Mode Best Practices Guide, http://www.netapp.com/us/media/tr-3107.pdf Thanks
View ArticleRe: LUN full
Hello, Not sure how you are getting on with this, however I am not convinced that resizing a partion without SnapDrive is a good idea. There is no connection between the partion and LUN sitting on the...
View ArticleRe: Failed Disk Not Rebuilding / Prefail State Several Weeks
The aggregates named abc1d101a_xxxx should be owned by node 101a.Aggregate: abc1d101a_600_sas01, rg7 is missing a disk. Thanks, Ken Owner Node: abc1d101a Aggregate: abc1d101a_600_root Plex:...
View Articleunable to add controller/vserver in snapcreator config
I am trying to create a config in scnapcreator server but unable to add Vserver. Getting below error. Operation failed, Check GUI logs for details. ( STORAGE-02152 STORAGE-03101: Determining Clustered...
View ArticleRe: ONTAP Select : Cannot create
Hello, It was a distributed vSwitch. I change my environment to have supported hardware server. On the new ESX server with standard vSwitch I can create the cluster and deploy the node. Thank you for...
View ArticleRe: How can I change the IP address of "ONTAP select Deploy(9.2RC)" DNS server?
Hi, Maybe you can try to do in the "vApp Options" tab in the "Edit Settings" of the Deploy VM Regards,
View ArticleRe: Error 500 Servlets not enabled In Fas 2020
Also, your system is so old and not supported anymore. Time to upgrade!
View ArticleNVE system overhead
We have a 6 node cluster made from FAS8040's and being pushed to enable the volume encryption feature in ONTAP 9.1. Has anyone tried this feature on non AFF systems and seen the CPU impact and general...
View ArticleRe: Failed Disk Not Rebuilding / Prefail State Several Weeks
I figured out... The disks will not rebuild/copy for the aggregates that are taken over by the partner. Cheers, Ken
View ArticleRe: VSM (TDP) fails consistently at 342.5GB
The intercluster lifs are 1500 and that matches the source. Not network related as 9 other volumes completed their VSMs just fine. This one volume is the only one that I have issues with. I may simply...
View ArticleRe: VSM (TDP) fails consistently at 342.5GB
All volumes on the source have VSMs going to another DR filer (7-mode to 7-mode) with no issues, and has been replicating like this for years. I completed 9 of the 10 volumes with TDP mirrors to cDOT...
View ArticleRe: VSM (TDP) fails consistently at 342.5GB
Thank you for confirming functionality. Sometimes MPLS links won't run actual 1500 byte packets, but if it is just LAN (where TDP runs most of the time anyway), that rules that out. If the VSM'ed copy...
View ArticleRe: ONTAP Select : Cannot create
As I understand from NetApp, this bug will be fixed in later releases. In the meantime, as I mentioned you can use the workaround to have the cluster created with a distributed vswitch. Create a dummy...
View Article