Re: is there any command to find NetApp FAS model name via putty in 7 mode.
Thankyou for the reply
View ArticleRe: FPolicy server and request timeout effects
After the timeout value is set (default is 0, means disabled), if the screen request is not complete within the set timeout value, the screen request is cancelled. thanks Jeff
View ArticleRe: LUN Serial Numbers and physically moving aggregates.
How (which toll etc) did you convert the LUN Serial in hex format?
View ArticleRe: LUN Serial Numbers and physically moving aggregates.
http://www.voleg.info/netapp_serial_to_wwid_converter.html
View ArticleRe: Snapvault : idle size of Aggregate
Ideal size of an aggregate? Hard to say. Depends upon several factors like the number of disks you have, the hardware platform, protocols used, and most importantly, your application.
View ArticleSVM: Change IP Address to another subnet/ipspace
Hi everyone, I need to change the svm ip address to another subnet (vlan). I've already created the interface vlan/subnet/ipspace/broadcast domain. I'm trying to change the svm lif association to...
View ArticleRe: NTP time sync issue - done everything to resolve but no go....
Thanks for reply guys. The issues was with the communication with with NTP server upon checking the route -s, there was no route shown - to establish the connection to NTP server. Hence executed...
View ArticleRe: SVM: Change IP Address to another subnet/ipspace
Hello, You cannot change the IPSpace of a vserver, for this you need to destroy the vSever and recreate it with a new/correct IpSpace. However, you need to create a new Broadcast domain with the new...
View ArticleRe: in Selective Lun Map, what if the HA pair owning the lun got failed?
A follow-up question. in the same 4-nodes cluster, what if "reporting-nodes" reports all 4 nodes, would that have any impact on performance?Since normally "reporting-nodes" should only reports 2-nodes...
View ArticleRe: SVM: Change IP Address to another subnet/ipspace
Ok, Thanks for your reply. But i think that Netapp should allow the vlan modify... Regards.
View ArticleMissing Configuration Files FAS2050
Good afternoon, All. I work for a subsidiary of a large corp, and I inherited a FAS2050 running 7.3.7P3 7 Mode. Out of the box, I did a wipe and selected 4a to create a Flexvol. Everything went fine...
View ArticleRe: in Selective Lun Map, what if the HA pair owning the lun got failed?
That depends. The primary reason for limiting the reporting nodes is to help avoid path depletion. For example, a VMware host can support a theoretical maximum of 1024 SAN paths. So the maximum...
View ArticleRe: SVM: Change IP Address to another subnet/ipspace
Hi Marco, You can modify lif form CLI ontap CDOT Regards,Bams
View ArticleRe: in Selective Lun Map, what if the HA pair owning the lun got failed?
Based on what you said, reported not-owning HA nodes by "reporting nodes" should not cause any performance issues, since SLM or reporting nodes only for the purpose of reducing the number of LUN paths....
View Articleaccess to /etc/quotas on vFiler
Hi I have root account on netapp 7-mode ontap and can access vFiler using vFiler context filer_name command to see listed quotas.I need to modify those quotas for the filer and here i have a problem,...
View ArticleRe: VSCAN on 7-mode for vfilers
Hi, mandatory scan is actually off for for our production vfilers - this vfiler is not in use but thanks. I will also check the abort timeout - again inherited - thanks. However, does anyone know of a...
View ArticleWhat could be a cause that system make upgrade from 32 bit to 64 bit in...
HelloI do have a questionWhat is the possibility way that this things happened? How could that happened? Tue May 17 12:50:24 CEST [matrix2:wafl.64bit.upgrade.vol.nospc:notice]: The 64-bit upgrade...
View ArticleRe: What could be a cause that system make upgrade from 32 bit to 64 bit in...
If you break 32 to 64 snapmirror relationship, destination is automatically converted to 64 bit. As far as I know this is the only case when system does it automatically.
View ArticleRe: moving/migrating lifs from one vserver to other vserver
when you create a lif with the role "intercluster" you have the options to create it on the "cluster" or "admin" vserver ::> net int create -role intercluster -vserver To give an answer on the...
View Article7MTT with Snapmirror Relationships
We have 2 old 7-Mode systems (Main and DR site) Use 7MTT 2.3.17-Mode systems is 8.2.3CMODE 8.3.2P1 We have CMODE system only on DR site now, CMODE system on Main site will be shipped later (next...
View Article